What’s going on with the orange button? It is needed when you are…..

If anything that bothers women the most is the size of their waist. They keep looking at their inch-tapes wrapped around their waists if they have lost a cm or gained one. This is important because after all, size decides what kind of clothes you can wear and fit in well. For all those women out there, LikeAGlove is here.

7190-08b044381c119143e3f08bdb84d66157

LikeAGLove are actually a smart piece of leggings that have built-in sensors and conductive fibres to measure a woman’s figure. You just have to slip them on, press the button on the front part of the leggings and use an accompanying iOS or Android app to calculate your hip, waist, inseams and other measurements. The app has a cross reference of more than 2,000 jeans in its database. The app then processes your measurements and gives you a list of different brands of jeans that are a perfect for your body type.

The company isn’t disclosing the names of its brand partners as it is still uncertain if the company receives any commission for referring sales to certain retailers. The promo does show brands like 7 For All Mankind, Hudson, citizen of Humanity etc. The company is also trying to make this technology feasible with other types of clothing as well (dresses and tops).

20151001_142010-750x422

This smart clothing is one size fits all and hence quite economical if a group of ladies use this. Its pre-order cost is $39.99 which will jump in a week to $99.99. So go fetch your smart leggings if you really want them.

You may be interested to watch the video below:

width="552" height="552" allowfullscreen="allowfullscreen">

As a technology lover you may like our daily important technology news series. It’s a playlist and you can retrieve the total day-wise videos. Please consider subscribing our YouTube channel:

Author: Technology and Beyond

If you see somebody wearing this kind of headgear, it means THIS….

Chameleons are pretty flexible creatures with limber limbs to grip sticks, skin changing colour by the second, a speedy flicking tongue and two amazing eyes for 180 degree vision. PolyEyes 2.0, by the Interactive Architecture Lab, is looking to take advantage of this fact and derive a concept so that we humans can have an all-round 180 degree vision too.

polyeyes-2-0

The wide headset uses two Raspberry Pi Camera Modules, which pivot in little clear domes. This revolution captures the surrounding and transmits it on the big viewing screen by a Raspberry Pi computer module. The viewing screen is split down the middle so each eye has its own range of vision.

PolyEyes 2.0 takes not only from the idea of chameleon eyes, but also from the concepts of exoskeleton and limbs, which the Interactive Architecture Lab bills as “part of a continuing process of upgrading the human entity.”

firsta_1024-980x407

[adinserter block=”7″]

You may be interested to watch this video:

Author: Technology Blog

5 technologies being developed by NASA for Mars mission will blow your mind!

NASA has its eyes set on 2030s with respect to its Mission to Mars and it is certainly moving ahead with great sincerity and persistence. Owing to this, the space agency, released a report about its progress and plans for the Mars mission. Apart from other long term goals, the agency gave a peek into some amazing technologies, which it plans to develop in coming years, to make the Mars Mission a reality as soon as possible. Here are our favourite five:

  1. New spacesuits: The very first thing that comes to mind when talking about a space mission is the spacesuit itself. Today’s spacesuits look more like inflated balloons than proper body hugging smart suits. Considering, astronauts going to Mars will have to spend nearly a year or more on the planet involving moving and roaming around, exploring and collecting data, the suit they wear should be such that it protects them from the damaging radiations of Mars and its cold thin atmosphere while still allowing them to move around freely in order to complete their work. The researchers want to make spacesuits that are easier to get around in. They may also incorporate augmented reality, self-healing materials, and interwoven bio-monitors. NASA plans to test a next-gen spacesuit when it sends astronauts to rendezvous with a boulder during the Asteroid Redirect Mission.
  1. ScreenSnapz011Deep Space Habitats: If we look at the mission we really can’t expect the astronauts to go to the Mars in a rocket and cram them in an Orion capsule for three years. So NASA wants a deep space habitat that attaches to the Orion capsule to provide more living space (and a bathroom) for the astronauts on board, as well as a habitat for them to live in on Mars. Such a habitat would need to provide life support, fire prevention, and radiation protection, in addition to giving the astronauts room to exercise and do their work.

667194main_hab1

  1. Huge rockets: The successor to the famous Space Shuttle is currently in making and is expected to be ready for lift off by 2018. This Space Launch System (SLS) will have the capability of carrying 70 metric tons of supplies into orbit. Later, it could send payloads of up to 130 metric tons into a trajectory towards Mars. At 382 feet tall, the SLS will eventually be the largest launch vehicle ever built, and even more powerful than the Saturn V rockets that carried the Apollo astronauts to the Moon. “This payload capacity far exceeds the capability of current and planned commercial launch vehicles,” says the report. Along with the Orion crew capsule (also in development at NASA), the SLS could eventually carry astronauts to Mars and other deep space destinations.

Orion_docked_to_Mars_Transfer_Vehicle

Next Page For More

Matrix Reloaded…this one is in real life….

According to a research published in Frontiers in Neuroscience, a new type of flexible electrode has been developed by a team from Lund University in Sweden. The problem with electrodes being used currently for brain monitoring is that they are made from solid materials and even if flexible, they still contain solid chips that make them stiff at some places.

fnsys-05-00034-g003

Such devices when inserted into the brain can rub against the super soft tissues of the brain and gradually damage them. In such a scenario, long term monitoring is not possible using such devices.

Taking into account all these points, the University team developed the electrode which is made from gold and measures just 10 microns in thickness. These electrodes are laser cut to shape and then insulated using a polymer called parylene C. To make it stiff enough to insert into the brain, the whole thing is coated in gelatine. Once it reaches its designated place, the layer dissolves itself without harming the brain and leaves the miniscule electrode in place.

The team expressed: “the new electrodecreates entirely new conditions for our understanding of what happens inside the brain and for the development of more effective treatments for diseases such as Parkinson’s disease and chronic pain conditions than can be achieved using today’s techniques.”

brain-electrodes-technology-wired-1

Brain is a complicated mesh of nerves and whatever helps us to understand it better is embraced happily by the science community.

[adinserter block=”7″]

Author: Technology Blog

When you see somebody wearing this type of bikini…it means THIS

Taking a swim in the ocean, or surfing on those huge waves is a delightful experience for one and all. But what if apart from having fun in the ocean you could contribute to the cause of decreasing pollution in the oceans? Wouldn’t it be great? Doing something good and that too while having a good time? Well UC Riverside is giving you the chance to do just that. An electrical engineer professor Mihri Ozkan along with her husband and fellow electrical engineering professor Cengiz Ozkan, with Ph.D. students Daisy Patino and Hamed Bay have designed ‘The Sponge Suit bikini’ which absorbs pollutants from the ocean as its wearer swims around in the sea.

Sunnyfair-2015-Fashion-New-Cute-Women-Swimsuit-In-One-Pieces-Sexy-Bathing-Suit-Sheath-Women-Swimwear

The material used for the purpose is called Sponge. It is designed for cleaning up oil and chemical spills and desalinating water. It is a water-repelling and highly porous carbon material that is light and flexible. It absorbs everything except water, and can absorb up to 25 times its own weight, depending on the density of the material absorbed.

The team disclosed in a written statement: “The form of the Sponge Suit is inspired by the super-porous, mesh-like structure of the Sponge material. The final form of the 3D print shell was obtained through the various iterations of the same undulating form. The filler amount and the allocation were identified by creating several design alternatives, considering the form and the ergonomics of the human body, while pushing the limits in translucent swimwear design.”

[adinserter block=”7″]

Next Page For More

Not a simple home with a vehicle. Look closely and you will be speechless !!

In present times, everywhere there is talk of finding sustainable ways of powering our houses and vehicles. Everywhere people are trying to reduce waste and pollution and hence carbon footprint. Searching for sustainable ways of powering homes, a research team from the Department of Energy’s Oak Ridge National Laboratory (ONRL) has created a new model for how we can connect the way we power our homes and vehicles. The model known as AMIE (Additive Manufacturing Integrated Energy), features a special technology. This technology allows a bi-directional flow of energy between a dwelling place and a vehicle. ONRL in order to test this new system completely used 3-D technique to build the home as well as the vehicle.

ORNL-3D-Printed-House-Vehicle-Sept-24-2015

Researchers claim that this is the first ever bi-directional power system in the world of working level 2(6.6kW). The building is fitted with a flexible 3.2 kW solar photovoltaic system, which is then paired with electric vehicle batteries, providing renewable power generation and storage. Energy can flow in either direction between the house and the vehicle via a wireless transfer system. This also means the vehicle can power the house when the sun has gone down or during cloudy periods. The efficiency of this bi-directional power system (BWPT) has come out to be 85 percent as BWPT uses a resonant technology that allows higher efficiencies through larger gaps.

In order to build the 210 sq ft. dwelling, ORNL worked alongside architectural studio Skidmore, Owings & Merrill. The single-room structure was built using 3D-printed parts and features curved lines and cost effective vacuum insulated panels. The home is equipped with a micro-kitchen concept, developed by GE FirstBuild, and the rooftop photovoltaic system is paired with batteries from a previously used Fiat 500e. Carbon fiber-reinforced ABS plastic composite material was used to print approximately 80 percent of the house components and 30 percent of the vehicle’s. ORNL’s Roderick Jackson, who led the AMIE demonstration project, informed: “”One of the interesting energy saving features is novel modified atmosphere insulation (MAI) panels developed by NanoPore that are about seven times more energy efficient than traditional wall insulation.”

[adinserter block=”7″]

Next Page For More

This engine-less airplane by Airbus reaches the edge of space. This is how…

What would you say if we told you that a plane that doesn’t fly very fast, isn’t quite large, barely accommodates two people, isn’t equipped with a propulsion system so can’t get airborne without being towed by another plane is rearing to fly to the edge of the space without an engine….. you would surely rubbish any such thing and walk away thinking that we are kidding! But we aren’t! The Perlan 2 glider plane is actually trying to create history by breaking the current altitude record of 90,000 feet set by any winged aircraft. Here it is to be noted that most commercial airliners fly at an altitude of 39,000 feet and that too with the help of jet engines.

glider-4

What can take an engineless plane to the edge of space?

Actually, the Perlan 2 pilots aim to surf on to massive air currents called stratospheric mountain waves. These mountain waves are extremely complex phenomena. Basically, when strong winds cross over a mountain range and the atmosphere above them is stable, massive waves of air will form on the lee side of the mountain. The wind rushing down the back side of the mountain causes an atmospheric disturbance, and then a couple miles downwind there’s a rebound area, where the air is rising. With the right conditions and a skilled pilot, it’s possible to ride these updrafts high into the upper atmosphere. Perlan Project Chief Pilot Jim Payne said: “Unless you’ve flown in a wave, it’s hard to understand the energy that’s available in the atmosphere.” The catch is, you can’t just ride on any mountain wave to reach the stratosphere as the common ones don’t go that high. But over the past couple decades, the Perlan team has succeeded in finding out that the really big mountain waves that you want to ride on are in Argentina as Argentina’s low latitude and high mountain ranges make it an ideal location for stratospheric waves to form. Basically a union of different atmospheric events take place over the country’s mountain ranges during the winter months, which together allow some mountain waves to propagate much higher into the atmosphere than they normally would.

In 2006, Perlan Project founder Einar Enevoldson and adventurer Steve Fosset had succeeded in taking Perlan 1 glider up to a height of 50,722 feet riding one such wave. They could have gone higher had their jumpsuits not inflated because of the high altitude. So they decided to build a glider with a pressurized cabin and hence the Perlan 2 Project was born.

Next Page For More

You will be shocked to know why Apple is planning to kill headphone jack

Strong rumours have been doing the rounds about Apple completely eliminating the 3.5 mm headphone jack from its soon to be launched iPhone 7. Apple being the notorious ‘secret Apple’ isn’t giving out any details about this, but a few reports suggest the reason behind eliminating this audio jack:

Because if Apple wants it, it wants it!

Apple knows its craze among iPhone lovers and fans. So it is infact in a very comfortable position to do whatever it wants. If it has decided to remove the audio jack, it will! It is a matter of choice for a company this huge that whatever it may decide to do with its products, millions still wait eagerly just to catch hold of the next in series.

For a thinner phone

Among the more reasonable reasons is the company’s need to make the phone thinner. The 3.5 mm audio jack acts as a hindrance in achieving this, so the solution…. get rid of it! Instead of using this jack, if Apple uses a lightning port, it will save them an entire 1 mm to be shaved off the thickness. Getting rid of the 3.5mm socket would also mean Apple can stretch the screen further down the device, with some even suggesting it could extend right to the phone’s base.

For a new wrap-around screen

If reports are to be believed, then the tech giant Apple filed a patent to change its screen design. The reports claim that the company is now considering a 4.9 inch wrap-around screen that leaves no space for the Home button, volume controls and the headphone jack. There is a possibility that iPhone 7 may have that wrap-around screen which is currently been exploited by the likes of Samsung and it may be a yet another step by Apple to compete with the rivals. Or in the worst case scenario, it may still be a rumour!

[adinserter block=”7″]

Next Page For More

Google locked 14 robot arms in a room together…and the result was terrifying ! 

We may be the one who created the robots and put artificial intelligence in but, that doesn’t necessarily mean that we have the upper hand in everything. In today’s context, the things are changing rapidly. This is because, everyday, newer tools and algorithms are being introduced to empower the robots to carry out many of the things autonomously.

robotarmstraininginparallel

Google, who has a massive stake in robotics, is taking a radical approach to train its robots. Google is allowing the robots to learn the things from each other. As per the latest report released by Google, they connected 14 robot arms together and deployed convolutional neural networks so that they consult one another and learn how to pick things up on their own..

The approach is very much similar to how little children upto four years, explore and learn the things.This exposure is providing them the opportunity to learn effective hand-eye coordination.

Typically, a robot is programmed to perform some specific tasks, but in this method, robots are prompted to learn through endless trial-and-error with the help of a neural network – This is very similar to how a child learns simply by watching other people.

The crux of the matter is to make robots prepared to roam around autonomously and for that, they need to interact and go along with the objects they haven’t encountered so far. No pre-programing need should bridge the gap between the sensorimotor skills of robots and humans.

[adinserter block=”7″]

Next Page For More

 

Tagged : /

The Art of Bridge Building! This is what this monster does!

SLJ900/32 weighs 580 tons and measures 300 feet in length, supported by 64 wheels split up into four sections of 16 wheels each, of which each section can rotate 90 degrees, enabling the entire machine to drive horizontally.

Bridge-3

Build by the Shijiazhuang Railway Design Institute, this machine is currently being employed to build a bridge connecting the cities of Chongqing and Wanzhou. China is using the machines mostly for the construction of high-speed rail viaducts.

Eliminating the need for cranes, this machine picks up a beam from the starting point and places it accurately on the pre-erected pillars after placing two supports in place. With the beam secured, the machine drives backwards, taking the two portable support structures with it. When it returns with another beam, it drives along the first installed segment, and the process is repeated to place the next beam between the first and second columns.

Bridge-1

Reported by the institute to be capable of building 730 spans in a lifetime, 40 of which can be reassembled over a thousand in a service lifetime on an average of four years.

As a technology lover you may like our daily important technology news series. It’s a playlist and you can retrieve the total day-wise videos. Please consider subscribing our YouTube channel:

Author: Technology and Beyond

If you see these tiny things hanging around, it means THIS…

Roar for Good is dedicated to preventing physical assaults and have come to with their first product which a tiny security device that is special in its own little way. It can be worn anywhere- on a belt, lapel, chain, key chain or bracelet.

Athena-4

Athena, as the device is called, is a petite and compact safety measure that on pressing lets out a loud alarm and texts the wearer’s location to her emergency contacts. This works as Athena contains a low-energy Bluetooth chip that pairs with a smartphone and cell service in order for the text messaging system. While pepper spray and tasers are not readily available to consumers and are often confiscated at airports, Athena was designed to be easily accessible to anyone. Also, if overpowered, the Athena cannot be used as a tool against the victim, like the aforementioned safety devices might.

The idea to create a device that could be worn on other places than on the wrist struck Athena cofounder Yasmine Mustafaduring “We took a self-defense class and we found out that the worst place to wear a safety device is on your wrist, because you only have one hand to activate it,” Mustafa explained. “That’s why we designed ours so it’s not a bracelet. You can wear it in a couple different ways.” This is what distinguishes Athena from others like Safelet. The original idea to build a safety device came during a solo backpacking trip across South America. “As amazing as [the trip] was…literally everywhere I went I would hear of a time where a woman had been attacked,” Mustafa told Mashable. When she came back, a nearby neighbor had gone outside to read her meter when she was attacked, brutally beaten and sexually assaulted. “When I read the news story the next day, that’s when the idea for ROAR was born.”

[adinserter block=”7″]

SilentROAR is another feature available in this device. This this feature activated, the alarm disables, but the text system continues to work. The idea behind this is to help the victims in an abusive domestic relationship to alert others without alerting the abuser.

Athena-2

While Athena is being marketed for women, Mustafa said the unisex product can be used by males, children and even the elderly. The battery-powered device is currently only available in three colors — Rose Gold, Antique Silver and Timeless Black — but the company plans to release more products down the line geared toward specific groups.

The product is currently crowdfunding on Indiegogo, has made and long crossed its goal of $40,000 within 48 hours of its launch. Roar For Good, a registered B-corp, hopes to fight sexual attacks and rage in its totality by planning to donate 10% of its Indiegogo proceeds to the One Love Foundation, which aims to educate high school and college students about relationship violence.

“Building these self-defense tools or safety tools to us is kind a short term strategy,” Mustafa said. “The whole idea is educating young children on what constitutes a healthy relationship with the goal of not needing these devices one day.”

Athena-1

Athena is expected to be available internationally in early May 2016 and will retail for $99.

Author: Technology Blog

Tagged : /

Make every window a power generator with this transparent solar cell!

Efforts have been on for quite some time in the direction of reducing the opaqueness of solar cells and it seems those efforts have started bearing fruits. California-based start-up Ubiquitous Energy has developed a completely transparent solar panel that’s practically as good as an average glass pane. Earlier it was considered impossible to create transparent solar cells, as, to convert solar energy into electricity the photons must be absorbed and the very nature of transparent materials is to let the photons go straight through them without being absorbed. But these transparent solar cells aren’t catching visible light.

Solar-5

These are actually harnessing the power of ultraviolet and infra red rays which are beyond the visible spectrum of light. Once the infrared and ultraviolet wavelengths are captured, they’re directed to the edges of the panel, where the light is captured by a very thin strip of traditional photovoltaic material and transformed into electricity.

But if you are imagining a world where every glass pane – be it the windows of your home or the screen of your smartphone – would act as a solar panel, then you will have to wait for quite a long time. Ubiquitous surely has stumbled upon a great technology but it is at “very” early stages of development and the road ahead is a long one.

[adinserter block=”7″]

According to Ubiquitous CEO Miles Barr, so far, the company has focused its commercial application efforts on wearable devices and digital signage, as the first official tech releases with transparent solar power panel screens. The Ubiquitous team believes that sooner or later they will be able to completely eliminate the need for batteries in small consumer gadgets and even smart phones. Apart from wearable gadgets and smart phones, the company also plans to venture into the field of un-tethered Internet of Things sensors and connected devices and large area smart windows.

Solar-2

It is to be noted that construction has already begun on a rapid prototyping facility as part of the company’s Silicon Valley headquarters. Taking the future into account, the company is also partnering with companies and manufacturers to join in development agreements to make the solar powered technology reach the markets quickly. There is no word from the company about when it wishes to start production, but its advent in smart wearables is comparatively near. Though the use of this technology in buildings and homes is still something hidden in the future, it still is a hope for those who believe in making Earth a greener planet once again.

width="560" height="314" allowfullscreen="allowfullscreen">

Author: Technology Blog

Ever saw naturally obtained synthetic silk? This is how we are going to get it from spiders!

If you are a woman then you know how much you love your clothes and shopping for new ones and if you are a man… well then….. it holds true for you too… who doesn’t like good clothes? But if we consider our history, we human beings haven’t exactly been quite experimental about our clothes and this is not in terms of designs and cuts and fashion, it is about the kind of fabrics we use. We have been using silk, cotton and wool fabrics since ages. What if we could find a new fabric?

spider-4

A California-based start-up known as Bolt Threads claims to have found a way to synthesize artificial silk. The company is among several groups trying to emulate the properties of spider silk to create a synthetic material useful for various purposes. But the problem with this way of creating silk is that it is extremely expensive so it is difficult to scale to mass production. The start-up also claims to have cracked the problems associated with getting silk from spiders and silk worms naturally (silk worms and spiders are considered as one of the most un- cooperative work-force, particularly spiders which tend to eat each other). The company supported by government grants and their venture capital money, plan to launch synthetic Bolt fabrics as a brand used by other clothing companies to make their clothes.

[adinserter block=”7″]

For creating this synthetic silk, Bolt uses yeast to create silk protein then minutely adjusts the ingredients and the process to shape the properties of the finished product. Right from buying the corn to produce yeast, the company keeps a hold on the whole production process. According to Bolt co-founder Dan Widmaier though earlier Bolt clothing would cost a premium, the company plans to keep prices affordable for consumers. He also claims that the environmental impact of synthetic fabric will be quite less than that of current textile production.

Adding to other things, Bolt says that by fine-tuning the process of fabric synthesis, it would be possible to control the properties of the fabric, for ex. making a lighter fabric for warm weather, stronger fabric for hard-wearing clothes. It would even be possible to make water-proof clothing for outdoor clothing and apart from that, the option of combining the properties are also open.

spider-2

All things considered, the biggest question that remains to be answered is whether Bolt can scale as a business and this only time can answer. Still it would be a great thing if it happens because apart from apparels, the synthetic fibre could also make itself useful in innovations like lightweight bullet-proof vests, medical devices or even composite materials for aircraft and construction. Till then we will just have to hope and wait!

Author: Technology Blog

Your WiFi crawls when your neighbor watches movies in their WiFi. Shocking?….This is how you can avoid it!

“Most people think it’s a mystery,” says Aleksandar Kuzmanovic, associate professor of electrical engineering and computer science at Northwestern. “They get upset at their routers. But what’s really happening is that your neighbor is watching Netflix.” Confused? Well, that is the truth. When many Wi-Fi signals are transmitted simultaneously, as will inevitably be the case in today’s world, the data packets (data is transferred by a system of packets) collide and back off. They slow down, and the process of signal propagation is delayed, hence the inexplicable slow Wi-Fi speeds.

wifm-5

Now researchers from the McCormick School of Engineering at Northwestern University have come up with a simple way to prevent this – and improve Wi-Fi speeds – by using Frequency Modulation (FM) and a smart time-sharing system that maximizes data throughput. This involves a whole lot of management, optimisation and ingenuity.

Dubbed Wi-FM by its creators, the system aims to prevent a person’s network data from competing with a neighbor’s data when packets of network data are transmitted at the same time. They take the help of FM, which is mostly inbuilt everywhere, in every device. The protocols used in Wi-FM allow the monitoring of the network and select time slots that are the least busy. That is when the FM radio signals are transmitted. “It will listen and send data when the network is quietest,” says PhD student Marcel Flores. “It can send its data right away without running into someone else or spending any time backing off. That’s where the penalty happens that wastes the most time.”

[adinserter block=”7″]

The existing Wi-Fi signals can communicate with each other by syncing the device in question to the digital information transmitted on the RDS (Radio Data System) section of a transmitted FM signal. The RDS contains information about the times of broadcasts to be made, the signals of which the McCormick Engineering team uses to allow their system to determine the “quiet” intervals in which the Wi-FM can transmit with the least interference.

“Our wireless networks are completely separate from each other,” says Flores. “They don’t have any way to talk to each other even though they are all approximately in the same place. We tried to think about ways in which devices in the same place could implicitly communicate. FM is everywhere.”

wifm-2

So that covers optimisation and ingenuity. The management part? Seeing as the system monitor other network to determine the time and amount of traffic, the patterns could be changed autonomously without any human intervention. “Our system can solve these problems without involving real people,” says Kuzmanovic. “Because are you going to knock on 30 doors to coordinate your wireless network with your neighbors? That is a huge management problem that we are able to bypass.”

Author: Technology Blog

This is how you charge your phone with your coffee power!

An age old concept with has gone around for quite a while is charging your electronic goods using heat from food or other electronics, that would otherwise get radiated out and go to a waste. But companies like Alphabet Energy are working on with thermoelectric technology to make this a reality.

IKEA-5

Design students at Copenhagen’s Institute of Interaction, Sergey Komardenkov and Vihanga Gore, recently proposed the idea of embedding this technology in furniture to Ikea; a dinner table or a desk could absorb heat from a plate of food or a laptop and turn it back into electricity.

Calling it the Heat Harvest, this idea was developed at an Ikea-run research lab opened this fall in Copenhagen called Space10. Right from their project description, while a normal laptop will consume about 40 watts of electricity and will emit the same amount of heat during operation, a Heat Harvest desk would use an embedded pad to absorb that latent heat and run it through a small thermoelectric generator. The resulting electricity would then be pushed back to the surface of the table through a wireless charging dock.

Ikea started selling kits to convert its furniture into wireless charging stations last year, but involving thermodynamics would be much, much more complicated. A material was required for this technology that was a great conductor of electricity, while simultaneously being a very bad conductor of heat. In other words, it should have the ability to absorb all the heat and give out all the electricity. That’s because the conversion process takes advantage of heat differences in a given conductor to generate voltage. Such materials are rare to come by, and extremely expensive to manufacture. But start-up energy companies like Alphabet Energy or Tellurex are developing low-cost versions that use nanotechnology to make any old semiconductor worse at conducting heat–making it possible to use them as thermoelectric generators.

IKEA-4

Here’s to your dream of letting your coffee do the work and charge your phone while you kicked back and relaxed.

[adinserter block=”7″]

Author: Technology Blog

Verified by ExactMetrics