Sound Waves Might work as a Better Way to Send Data and Save Power

Researchers from the University of Leeds and Sheffield University have figured out a way to transport data through magnetic nanowires by using acoustic waves for force. It is estimated that this technology for the racetrack solid-state memory, would greatly benefit by this new technique with increased speeds and reduced power consumption.

sound-3

Racetrack memory uses the transition between different magnetic moments (directions) in the domain walls separating each of the magnetic areas found in the nanowires that make up the memory. Developed by IBM, this works using a system of binary data and each transition between these areas results in an angular displacement (a change of magnetic “direction”) of 90 or 180 degrees.

The usual troubles faced while moving data across the lines is posed by the magnetic inertia in the domain walls. The trick to transporting this data which is 20 times smaller the size of a human hair, is to overcome the inertia with strong magnetic fields and induced electric currents. However, this consumes a lot a more power than gives speed.

[adinserter block=”7″]

In the sound wave method, two counter-propagating surface acoustic waves (SAW) are passed across the piezoelectric substrate to which the nanowires are fixed. When the two waves meet, a standing wave is created which then can manipulate and rearrange the arrays for effective circulation of energy across the wires. Technically, the domain walls become attracted to and pinned at the points of antinodes of standing stress/strain waves and the data moves along the wires in a ratcheted motion toward positions of minimum stress. Thus, by shifting the frequency of the SAWs, multiple domain walls can be synchronously propagated at high velocities. Basically, changing the pitch would change the direction.

sound-2

“The key advantage of surface acoustic waves in this application is their ability to travel up to several centimeters without decaying, which at the nano-scale is a huge distance,” said Doctor Hayward. “Because of this, we think a single sound wave could be used to ‘sing’ to large numbers of nanowires simultaneously, enabling us to move a lot of data using very little power. We’re now aiming to create prototype devices in which this concept can be fully tested.”

Author: Technology Blog

Largest Fusion Reactor is Ready for Use After 19 Years of Work

After vigorous tests to test its competency and improvements made over the past 19 years and approximately over 1.1 million construction hours of work, the world’s largest fusion reactor is going to be put to work in Germany. Hosted at the Max Planck Institute, the stellarator, also known as Wendelstein 7-X (W7-X), is awaiting regulatory approval for a launch later this month, reports Science. Once it is introduced online, it will overtake its competition- the Large Helical Device (LHD) in Toki, Japan, which began operating in 1998, currently the largest working stellarator.

fusion-4

The working on W7-X was started in 1993, with the German government funding the Greifswald Institute. But along the ways several difficulties and faults arose with the model, nearly stopping its development altogether. But at last, this fusion reactor is going to see the light of the day.

[adinserter block=”7″]

The speciality of this fusion reactor is that its process is all about fusion of the atoms , as opposed to the usual technique of fission applied instead. The nuclear fusion reactor uses high temperatures, as high as 100 million degrees Fahrenheit, to heat plasma, while powerful magnetic fields — up to 50 six-ton magnetic coils in the case of the W7-X — are used to contain and control it.

The reactor is expected to confine the plasma and generate energy for at least thirty minutes at a time, much longer than the usual six and a half minutes of competing fusion reactors that use a tokamak-based design.

“The world is waiting to see if we get the confinement time and then hold it for a long pulse,” said David Gates, the head of stellarator physics at Princeton’s Plasma Physics Laboratory.

fusion-5

Now scientists are waiting for the green light to bring plasma into the facility and test the nuclear fusion reaction. Government approval is pending to perform the last test.

Author: Technology Blog

Verified by ExactMetrics