Japanese Researchers Create Self-Replicating Artificial Cells

The widely accepted and propagated explanation to how life on earth began consists of meteorites showering on the then lifeless earth, and bringing to is carbon compounds that were amino acids and hence life sprung forth. But the question still remains largely answered as those cells which replicate to create life, were never alive in the first place. Japanese researchers have joined in the struggle for answers by making self-replicating cells that might give us some more clues.

700_d6346e73ac6e18f7946661955389e84f

The researchers made a synthetic “protocell” made of DNA and proteins packaged inside lipids, which are fatty compounds meant to mimic the cell membrane. The DNA held in these cells are programmed to replicate under the right conditions of temperature and pH. But cells undergo many cycles of replication and replenishment, the latter was proving to be a challenge for the scientists to achieve in these protocells.

As the solution, the newly split synthetic cells were designed to combine with other cell-like structures nearby and three successful cycles were completed in the laboratory set-up.

The entire cycle that has been decided now after due observance of the protocells is: ingestion (the cells combine to replenish supplies), replication (the DNA is copied), maturity (the cells prepare to divide), and division (new cells split out from the parent).

This cycle can be explained up to a huge extent by the conditions found on earth early on. The pH changes that brought on three of the four phase transitions could easily happen around hydrothermal vents, the study authors write. But other questions still remain unanswered, such as how the physical characteristics, or phenotype were passed on, or how evolution-driving mutations might have taken place, and the speed of replication.

screen_shot_2015-09-28_at_3.48.06_pm

More advanced and sophisticated protocells are planned to be developed soon by these researchers.

[adinserter block=”7″]

Author: Technology Blog

A 4-gram origami robot that crawls and jumps

Innovation and creativity keeps our mind young. So keep innovating and creating. This is exactly what The École Polytechnique Fédérale de Lausanne (EPFL) believes. Specializing in origami robots, a team of EPFL has created another gem under the guidance of robot-origamist (or robogamist) Jamie Paik. Taking inspiration from nature, the robot they have created is basically a Tribot that crawls like an inchworm, jumps like a flea and then crawls again without being broken. It is just two centimetres tall and weighs a mere four grams.

tribotimage1-600x400

The body structure of the Tribot is T-shaped and it has flexing legs. It is capable of crawling along nearly any surface, jumping up to seven times its height and crawling again after landing. This motion allows it to move easily over obstacles while continuing on its desired path. Though it is not designed keeping any specific function in mind, but basis what it can do, it has the potential for surveillance application in areas with difficult terrain.

To make it light and extensible, the team used a titanium and nickel ‘shape memory alloy’ (SMA). This memory alloy is unique as it has the ability to remember its original configuration even after changing shape. So after deformation, the alloy forces itself back into shape by heating the material to a specific temperature. This same SMA formed the basis for the intelligent springs and actuators which power the two-legged device. Its thermal activation allows researchers to control movement by applying heat to different parts of the robot.

The Tribot crawls when an electric current or a wireless micro-heater is used to heat the actuators. The jumping motion is controlled by the SMA springs. Because of this, the robogami machine has the ability to crawl, jump, and crawl again without requiring a reset. The robot can be easily assembled and folded.

Tribot

Keeping the future in mind, Jamie Paik plans to equip the micro-robots with sensors and cameras to allow them to communicate with each other and to sense their surrounding environment. Till that happens, we are happy to see the little robot jumping and crawling.

[adinserter block=”7″]

Author: Technology Blog

Gel scaffolding to hold together the 3D printed biological organs

The latest rage in the field of technology: 3D printing has found its use in building prototypes, construction, medical research and what not. In medical research, researchers have been trying to create 3D printed organs, but the greatest glitch is that using traditional 3D printing to create the kinds of structure found in our organs makes them collapse long before being finished.

feature2

So a new technique proposed by a team of researchers led by Thomas Angelini at the University of Florida in Gainesville, simply adds gel to improve the 3D printing. Addition of gel supports the complex shapes that would fall apart under their own weight in normal 3D printing. The gel, which has the consistency of hand sanitiser, is made of an acrylic acid polymer. It works like a scaffold, allowing the printing of intricate patterns that would collapse without its support.

Printing a whole human organ needs a fine, dividing systems of blood vessels to supply them with oxygen and nutrients. The technique using gel enables printing at the right dimensions to do this, creating structurally sound spheres as thin as two sheets of paper and strands about 10 times thinner by embedding the objects in gel.

Angelini’s team has already used the technique to print material out of living cells – including human blood-vessel and canine kidney cells. The team also plans to use silicone, hydrogel and other polymers, and made a replica of a colleague’s brain in the soft, tissue-like consistency of hydrogel to test it out. Internal organs are as individual as faces, so they based the brain on detailed images of the professor’s grey matter. “We could foresee a future in which, before brain surgery, the surgeon 3D prints a brain out of hydrogel and then practises on it,” says Angelini. “Then the surgeon knows exactly how that surgery is going to happen.”

organovo-3d-printer

The findings and the work of this research team is indeed fantastic but the only limitation is that so far the gel is not organic, so it couldn’t keep 3D-printed tissue alive. Neither can the gel be used for structures printed below a certain size because very small particles then slip out of it like fish through a net. But with all the limitations it still is a great technique and once all the glitches and limitations are removed, can prove to be a magic trick in many medical conditions.

[adinserter block=”7″]

Author: Technology Blog

Verified by ExactMetrics